The F510 Fan and Pump AC Drive is an easily configured and versatile drive product that will control almost any application involving fans, blowers, and centrifugal pumps. It comes standard with a simple-to-select pre-set application parameter for commonly applied fan and pump applications.
It is the ideal product for fan and centrifugal pump applications: HVAC; Wastewater; Industrial Cooling Towers; Industrial pumping and Irrigations
It is available with an intelligent Keypad with real-time clock and can regulate pump cascade up to four pumps to operate at optimum efficiency. In addition it can control up to 8 pumps to share the load.
CHARACTERISTICS
Built-in pump cascade control for up to 4 pumps
Option card for control of up to 8 pumps
Two separate PID loop controls
Switch between PID loops based on input signal or real-time clock setting
Extensive monitoring and display capabilities
Real time clock built-in (RTC)
Conformal coating of all printed circuit boards (non-hazardous)
Plenum Rated
Built-in Modbus RTU, BACnet MS/TP, or Metasys (N2) communications via on-board RS485 or RJ45 connection
Built-in PLC functionality
Scalable process parameters to engineering units
Digital I/O
6 Configurable digital inputs
Over 40 available selections per input
Assign inputs as normally open or normally closed
24V power supply on board
Extremely fast update time
3 Configurable digital relay outputs
Qty (1) form C and (2) form A type relays
Over 20 available selections per output
Assign outputs as normally open or normally closed
Dedicated hardware safety input for user’s emergency interface
Selectable fast ramp or coast stoppingz
Analog I/O
2 Analog inputs
One channel assignable as 0-10V or 4-20mA input signal
Assignable gain and bias for each channel
2 Analog outputs
Assignable as 0-10V or 4-20mA signals
Over 20 available selections per output
Assignable gain and bias for each channel
PTC input
Direct reading of water temperature
Pulse input and pulse output signals
1 pulse input capable of up to 32 khz
1 pulse output capable of up to 32 khz
3 modes of auto tuning to best adapt the F510 with the applied motor
Controls induction or permanent magnet motors
100 Mhz RISC process for ultra-high-speed computations and rapid loop-time updates
